35 Watt High Power YAG Laser Projector
Excalibur is a
high power (35 watt) frequency doubled, Q switched NdYAG laser
system. It is manufactured in the U.K. specially for the Laser
Display market. At full power the system draws less than 10 amps
from a single phase 220v supply. The laser is cooled by a compact
refrigerated cooling system. Typical diode lifetime is typically
8000 hours. The operation of the laser is controlled by a hand held
RS232 remote control unit.
Ethernet
interface now available for full wireless/LAN control
| Full Power: |
> 35 W |
| Wavelength |
532 nm |
| Nominal Repetition Rate |
Q Switched 18KHz |
| Pulse Width |
400ns |
| Peak power |
20 KW Maximum |
| Beam Detail at Laser |
<2.0mm - 3mrad Full Angle |
| Beam Detail (With Telescope) |
2-8mm Variable <0.5 mrad Full Angle |
| Polarisation |
Horizontal Plane |
| Power Supply |
230V ac 50 +-10% (60Hz Available) |
| Power Consumption |
10 amps Maximum |
| Cooling |
Refrigerant |
| Signal Input |
ILDA Standard |
| Laser Diode Lifetime |
Typically 8000 operating hours |
| Operating Temperature |
8° C up to 30° C [Optimal 25
°C] |
| Projection System |
Cambridge Technology 6220 |
| Projection Angle |
40º Optical |
| Dimensions |
Head: 800(w) x 150(h) x 150(d) mm 13.8kg
PSU: 485(w) x 145(h) x 610 (d) mm 20kg
Chiller: 485(w) x 300(h) x 715(d) mm 42kg
|
| Warranty |
12 Months Return to Base |
This is high tech-laser equipment. Be careful of
mechanical Shocks, avoid exposure to high or low
Temperatures (exposure to sun or temperature over 35 degrees celsius.
Avoid static electrical power whilst handling/installing any laser
Hardware.
Contact Us -
About Laser Technology -
Laser Displays -
Pangolin LD2000 -
Pangolin LivePro -
FB3 Control Desk -
Excalibur YAG Laser -
Laser Display News
Laser Technology
Ltd U.K.
